Ocean House, Redfields Industrial Park, Redfields Lane, Church Crookham, Hants, GU52 0RD.

Tel: 01252-851510 Fax: 01252-851296 Email: sales@videoswitch.co.uk

Upgrading Vi-K2 and VK-2


Product Series
Firmware Update
Programming Utility
Instructions
Vi-K3
Vk003J10
V-Flash
  • Download the Firmware Update by right clicking on the underlined link and then selecting "Save target as.." to save the file to your computer's hard drive.
  • Download the V-Flash file in the same manner.
  • Install V-Flash on the PC and run it.
  • Select the firmware update file that you have downloaded.
  • The VK-2 or Vi-K2 must be connected to a PC via a serial cable (9-way D-type male to 9-way D-type female).
  • The keyboard may require a factory reset prior to upgrade. To do this, press and hold the Blue key for 10 seconds while appying power).
  • Program the VK-2 or Vi-K2 via the RS232 cable.
  • While the upgrade is in progress, the keyboard shows incrementing numbers on its LED display. This may take several minutes.
  • Do not remove power while the upgrade is in progress.
  • The keyboard has finished programming when it is no longer showing incrementing numbers on its LED display and has restarted.
  • The V-Flash program can now be closed.
  • Remove power to the keyboard and check that the last digits of the new firmware are displayed momentarily when power is re-applied (note that power may be derived via both CAT5 link and external power supply, so diconnect both to achieve power down)
Vi-K2
Vk002J5
VK-2

VK001J5

 


©Ocean Systems Ltd 2008